1. (Optional) Backup your existing configuration
Copy the existing configuration file from the VSP to the TFTP or FTP server.
vsp-8404c_1:1#copy config.cfg 192.168.1.2:vsp-8404c_1_03.27.2019.cfg
2. Download the firmware image that you want to load.
You should be able to download the latest image from the ExtremePortal.
In this example, I downloaded VOSS8K.8.0.0.0.tgz.
3. Upgrade VSP Software Image
Step 0. (Optional) Check the current version
show software
vsp-8404c_1:1#show software
====================================================================================================
software releases in /intflash/release/
====================================================================================================
VOSS8K.7.1.0.1 (Primary Release)
----------------------------------------------------------------------------------------------------
Auto Commit : enabled
Commit Timeout : 10 minutes
Step 1. Copy the upgrade image to your VSP chassis using FTP (via SSH, TCP/22)
In this example, I have transferred the VOSS image via FileZilla (open source FTP software). You can simply drag and drop the tgz file into the /intflash directory to the right panel from your system. (/Users/username/TFTP/VOSS8K.8.0.0.0.tgz)
You may double check the file via CLI command 'ls' as below.
ls /intflash/VOSS*
vsp-8404c_1:1#ls /intflash/VOSS*
Listing Directory /intflash:
-rw-r--r-- 1 0 0 218989797 Mar 28 08:05 VOSS8K.8.0.0.0.tgz
- Internal flash
Boot flash memory is split into two banks that each contain a different copy of the boot image files. Only the Image Management feature can make changes to the boot flash.
The system flash memory stores configuration files, runtime images, the system log, and other files. You can access files on the internal flash through the /intflash/ folder.
Step 2. Unpack the software release
Add the VOSS image to the VSP 4000/8000.software add VOSS8K.8.0.0.0.tgz
vsp-8404c_1:1#software add VOSS8K.8.0.0.0.tgz
Extracting distribution information from /intflash/VOSS8K.8.0.0.0.tgz
Extracting software version VOSS8K.8.0.0.0.GA from /intflash/VOSS8K.8.0.0.0.tgz
Extraction of VOSS8K.8.0.0.0.GA to /intflash/release/VOSS8K.8.0.0.0.GA successful
Setting permissions on /intflash/release/VOSS8K.8.0.0.0.GA successful
Step 3. Copy the software release to boot flash
Copy software versionsoftware activate VOSS8K.8.0.0.0.GA
vsp-8404c_4:1#software activate VOSS8K.8.0.0.0.GA
Executing software activate for version VOSS8K.8.0.0.0.GA.
Validating release VOSS8K.8.0.0.0.GA
[03/28/19 09:43:24] Sending upgrade message to slots: 1. Version=VOSS8K.8.0.0.0.GA
[03/28/19 09:43:25] Slot 1 : IMAGE SYNC: Running pre-install script for image version VOSS8K.8.0.0.0.GA
[03/28/19 09:43:25] Slot 1 : IMAGE SYNC: uBoot image is consistent
[03/28/19 09:43:25] Slot 1 : IMAGE SYNC: Kernel image is being updated...
[03/28/19 09:43:29] Slot 1 : IMAGE SYNC: Root_FS image is being updated...
[03/28/19 09:43:55] Slot 1 : IMAGE SYNC: APP_FS image is being updated...
[03/28/19 09:45:08] Slot 1 : IMAGE SYNC: Running post-install script for image version VOSS8K.8.0.0.0.GA
[03/28/19 09:45:08] Slot 1 : IMAGE SYNC: Backup image successfully upgraded to VOSS8K.8.0.0.0.GA
Primary Version: VOSS8K.8.0.0.0.GA
Backup Version: VOSS8K.7.1.0.1
Changes will take effect on next reboot.
Step 4. Reboot the VSP 4000/8000 to load the new image
reset
vsp-8404c_1:1#reset
Are you sure you want to reset the switch (y/n) ? y
Rebooting takes about five minutes or so.
show software
vsp-8404c_1:1#show software
************************************************************************************
Command Execution Time: Thu Mar 28 10:00:46 2019 UTC
************************************************************************************
====================================================================================================
software releases in /intflash/release/
====================================================================================================
VOSS8K.7.1.0.1 (Backup Release)
VOSS8K.8.0.0.0.GA (Primary Release)
----------------------------------------------------------------------------------------------------
Auto Commit : enabled
Commit Timeout : 10 minutes
Remaining time until software auto-commit is 9 minutes 33 seconds
Step 5. Commit the new software image updated after reboot
Make the running software release trusted.Or it could be auto-committed after 10 minutes by default.
If you do not commit the software and auto-commit is not enabled, your switch restarts with the last known working version after the commit timer has expired. By default, auto-commit is enabled.
software commit
vsp-8404c_1:1#software commit
Executing software commit for version VOSS8K.8.0.0.0.GA.
Software commit successful
Step 6. Check the software version/release
show software
vsp-8404c_1:1#show software
************************************************************************************
Command Execution Time: Thu Mar 28 10:01:29 2019 UTC
************************************************************************************
====================================================================================================
software releases in /intflash/release/
====================================================================================================
VOSS8K.7.1.0.1 (Backup Release)
VOSS8K.8.0.0.0.GA (Primary Release)
----------------------------------------------------------------------------------------------------
Auto Commit : enabled
Commit Timeout : 10 minutes
show software detail
vsp-8404c_1:1#show software detail
************************************************************************************
Command Execution Time: Thu Mar 28 10:51:10 2019 UTC
************************************************************************************
====================================================================================================
software releases in /intflash/release/
====================================================================================================
VOSS8K.7.1.0.1 (Backup Release)
SSIO
UBOOT 18081615
KERNEL 4.9
ROOTFS 4.9
APP_FS VOSS8K.7.1.0.1int005
AVAILABLE ENCRYPTION MODULES
No Modules Added
VOSS8K.8.0.0.0.GA (Primary Release)
SSIO
UBOOT 18081615
KERNEL 4.9
ROOTFS 4.9
APP_FS VOSS8K.8.0.0.0int055
AVAILABLE ENCRYPTION MODULES
3DES
AES/DES
----------------------------------------------------------------------------------------------------
Auto Commit : enabled
Commit Timeout : 10 minutes
No comments:
Post a Comment